Quick Order
Our bow card holder mounted lights are an easy way to illuminate the bow of your rowing shells.
Features:
Easy on/off, just like putting on a bow card
Waterproof
Angled light brackets cast the lights to the side and forward of the boat
High-gloss polymer and unique design reflect additional light off the front flag of the mount
Lights can be easily switched from strobe to solid and back again by changing battery orientation
Each light takes (2) CR2032 batteries, the same ones used in NK Products
Hundreds of hours of use with new batteries, only change batteries once a year
Customizable at no additional cost! Add athlete, program, or boat names to each card for easy identification, especially in boat houses where several program or clubs use common areas. (Each different customization requires adding a new item to cart)
Mounts made in USA. Lights made in Canada
Already own these lights? Order just the mount!
Disclaimer: These lights should be considered supplemental to aid in crew identification and heading. Manually propelled watercraft operating between sunset and sunrise are typically required to carry a white-light with the ability to be shown in all directions (usually in the form of a lantern or flashlight held by the operator) instead of red/green/white directional navigation lights required of sail or powered watercraft. Please refer to your local ordinances for requirements in your area.
A new version is in the works, please be patient while we update our design and website.
Thank you to those who provided valuable feedback.
Made with light-weight carbon fiber tubing, carbon fiber reinforced polymer, and stainless steel spring and hardware.
Replacement Snap Spacers in Various Colors
Ten (10) spacers per order
If you are interested in custom colors, please contact us to discuss your options and pricing.
You complained, we listened!
Introducing the second generation of our Catch Stick Pro!
The V2 offers all of the functionality and build quality of our pervious version with added features and versatility.
Features:
Constructed from carbon fiber reinforced plastic, stainless steel hardware, and lightweight carbon fiber tubing.
Easy-on, easy-off clamp attaches to gunwale flanges
Folding design—fold it up when you need it, down when you don’t
Carbon fiber shaft wont blow around in wind or fail to return to vertical
Spring mount allows rowers to “tap” or “catch through” the stick
Indexing notch—mark on the gunwale where it attaches. Remove and re-attach the catch stick with confidence you’re putting it in the right place
Lanyard hole to attach to rigger/boat (lanyard not included)
Changes from Original:
Reversible design—sweep the arm to bow or to stern depending on boat construction and desired catch angle
Snap-on Side-Plates make identifying port and starboard stick easier.
Improved clamping geometry for a tighter hold on the gunwales
Sold in mirrored pairs of 2, 4, and 8. Please contact for larger orders.
Product ships with 2 spare side-plates per pair of arms.
Compatible with Hudson boats using exposed steering yokes. Other boat compatibility not guaranteed (testing in progress).
Features:
Easy on/off with two thumb screws
Waterproof design
Lanyard holder to secure mount to hull
Angled brackets and dome-shape cast light behind and to the sides of your stern
Each light takes (2) CR2032 batteries, the same ones used in NK Products
Hundreds of hours of use with new batteries, only change batteries once a year
Customizable at no additional cost! Add athlete, program, or boat names to each mount for easy identification, especially in boat houses where several program or clubs use common areas. (Each different customization requires adding a new item to cart)
Each mount made-to-order, custom colors to match your boat or team
Mounts made in USA. Lights made in Canada
Already own these lights? Order just the mount!
Disclaimer: These lights should be considered supplemental to aid in crew identification and heading. Manually propelled watercraft operating between sunset and sunrise are typically required to carry a white-light with the ability to be shown in all directions (usually in the form of a lantern or flashlight held by the operator) instead of red/green/white directional navigation lights required of sail or powered watercraft. Please refer to your local ordinances for requirements in your area.
If you are interested in custom colors, please contact us to discuss your options and pricing.
(We are still finalizing the design of this product, this is a placeholder page)
Our CoxCaddie™ mount solves the problem of having no good place to mount a speedcoach or coxbox in a bow-loaded 4+.
Features:
Slim profile fitting new versions of the NK CoxBox and speedcoach GPS
Fold-away design allows for easy egress of a capsized boat
Lanyard loops to keep electronics secure
Adjustable angle between 0 and 20 degrees to suit coxswain’s preference
Waterproof plastic and stainless steel construction
Customizable Team/Club branding
(see video below for detailed walk-around)
Includes:
CoxCaddie, mount, and stainless steel hardware
Stainless steel screws for SpeedCoach mounting bracket (bracket not included)
Load-distributing washer/drilling template
Please note that the CoxCaddie is suitable for boats with gunwale flanges 20mm or wider. Compatibility with smaller gunwale flanges not guaranteed.
10mm Thumb Nut
Price is for one (1) thumb nut
Features:
Specifically designed for Filippi footstretchers where traditional wingnuts will not work
High stand-off clears toe bars
Narrow wings clear footplates
Pass-through hole at the top to allow for use with extra-long bolts
Compatible with any 10mm bolts
Stainless steel and plastic construction to mitigate corrosion
Additional sizes (1/4-20, 1/4-28, etc. in development)
If you are interested in custom colors, please contact us to discuss your options and pricing.
Easy tool to set oarlock angle.
Protractors are sized for 13mm, 1/2 inch, and 9/16th inch and are colored to match Concept2 pitch bushing colors of the corresponding size.
Kit includes a carrying case with (marked with common catch angle ranges), scull (red) and sweep (orange) oarlock pointers, and alignment sight (green) plus your choice of protractor size.
Protractors are also available for purchase on their own.
How to use the kit (basics):
Remove a snap spacer from below your oarlock and replace with the protractor.
Attach the sight (green) to the latching bar of the oarlock.
Attach the pointer (red for sculling, orange for sweep) to the bottom of your oarlock and slide it so that it is near the protractor
Looking down the sight, pivot the oarlock so that the next pin (either to stern or bow of) is aligned between the towers of the sight
Keeping the oarlock in that orientation, adjust the protractor so that “0” mark is in line with the pointer. Now the protractor is “zeroed”
Load an oar into the oarlock and, keeping the sleeve of the oar flush with the back of the oarlock, rotate the oar and oarlock to the desired angle
Keeping the sleeve of the oar flush with the back of the oarlock, mark on your gunwale the location of the handle
For additional information on how to use, please refer to the video at the bottom of this page.
Compatible with almost any boat with a smooth and clean finish on the stern deck.
Features:
Unique screw-tensioning mounting system ensures a reliable suction to the deck of your boat
Waterproof design
Lanyard holder to secure mount to hull
Angled brackets and dome-shape cast light behind and to the sides of your stern
Each light takes (2) CR2032 batteries, the same ones used in NK Products
Hundreds of hours of use with new batteries, only change batteries once a year
Customizable at no additional cost! Add athlete, program, or boat names to each mount for easy identification, especially in boat houses where several program or clubs use common areas. (Each different customization requires adding a new item to cart)
Each mount made-to-order, custom colors to match your boat or team
Mounts made in USA. Lights made in Canada
Already own these lights? Order just the mount!
Disclaimer: These lights should be considered supplemental to aid in crew identification and heading. Manually propelled watercraft operating between sunset and sunrise are typically required to carry a white-light with the ability to be shown in all directions (usually in the form of a lantern or flashlight held by the operator) instead of red/green/white directional navigation lights required of sail or powered watercraft. Please refer to your local ordinances for requirements in your area.
If you are interested in custom colors, please contact us to discuss your options and pricing.
It pulls pitch plugs. Duh.
Compatible with Blue (13mm), White (1/2in), and Black (9/16in) Concept 2 sweep pitch bushings and other manufacturers with the similar dimensions.
If you are interested in custom colors, please contact us to discuss your options and pricing.